In this article, we will guide you to upgrade the above firmware Aruba Switch device running ArubaOS.
– Default Switch ArubaOS Receive IP from DHCP Server in the system, or you can set a static IP for it as follows.
Aruba-2930F-24g-4SFPP# configure terminal
Aruba-2930F-24g-4SFPP(config)# vlan 1
Aruba-2930F-24g-4SFPP(config)# ip address
– Use commands show system to see which firmware version is running.
– Find and download the firmware for your device line on the Aruba Support Portal page. After downloading, set up a tftp server on your computer and put the downloaded file into the tftp server folder.
– On the switch use the following command to copy the firmware and flash of the switch.
Aruba-2930F-24g-4SFPP# copy tftp flash primary|secondary
– After copying is completed, use the command reload to reboot the switch, switch aruba will reboot and use the new firmware.
!!! Thank you for following the article!!!
Xem tiếp...
