• Kiếm tiền với Hostinger

    Kiếm Tiền Cùng Hostinger

    Bạn đang tìm kiếm cách kiếm thêm thu nhập online? Hãy tham gia ngay chương trình Affiliate của Hostinger! Với mỗi khách hàng đăng ký thông qua liên kết của bạn, bạn sẽ nhận được khoản hoa hồng hấp dẫn.

    Hostinger cung cấp các dịch vụ lưu trữ web (hosting) chất lượng cao với mức giá cạnh tranh, giúp bạn dễ dàng giới thiệu và thu hút người dùng.

    Đừng bỏ lỡ cơ hội tuyệt vời này để tăng thêm thu nhập thụ động.

    Tham Gia Ngay

pin lithium

In microelectronics, a dual in-line package (DIP or DIL), is an electronic component package with a rectangular housing and two parallel rows of electrical connecting pins. The package may be through-hole mounted to a printed circuit board (PCB) or inserted in a socket. The dual-inline format was invented by Don Forbes, Rex Rice and Bryant Rogers at Fairchild R&D in 1964, when the restricted number of leads available on circular transistor-style packages became a limitation in the use of integrated circuits. Increasingly complex circuits required more signal and power supply leads (as observed in Rent's rule); eventually microprocessors and similar complex devices required more leads than could be put on a DIP package, leading to development of higher-density chip carriers. Furthermore, square and rectangular packages made it easier to route printed-circuit traces beneath the packages.
A DIP is usually referred to as a DIPn, where n is the total number of pins. For example, a microcircuit package with two rows of seven vertical leads would be a DIP14. The photograph at the upper right shows three DIP14 ICs. Common packages have as few as three and as many as 64 leads. Many analog and digital integrated circuit types are available in DIP packages, as are arrays of transistors, switches, light emitting diodes, and resistors. DIP plugs for ribbon cables can be used with standard IC sockets.
DIP packages are usually made from an opaque molded epoxy plastic pressed around a tin-, silver-, or gold-plated lead frame that supports the device die and provides connection pins. Some types of IC are made in ceramic DIP packages, where high temperature or high reliability is required, or where the device has an optical window to the interior of the package. Most DIP packages are secured to a PCB by inserting the pins through holes in the board and soldering them in place. Where replacement of the parts is necessary, such as in test fixtures or where programmable devices must be removed for changes, a DIP socket is used. Some sockets include a zero insertion force (ZIF) mechanism.
Variations of the DIP package include those with only a single row of pins, e.g. a resistor array, possibly including a heat sink tab in place of the second row of pins, and types with four rows of pins, two rows, staggered, on each side of the package. DIP packages have been mostly displaced by surface-mount package types, which avoid the expense of drilling holes in a PCB and which allow higher density of interconnections.

View More On Wikipedia.org
  • 2

    cnsg

    • Bài viết
      31
    • Reaction score
      0
    • Điểm
      6
  • 1

    ExtendMax

    New member
    • Bài viết
      21
    • Reaction score
      0
    • Điểm
      1
  • 1

    tanbungbu

    New member
    • Bài viết
      4
    • Reaction score
      0
    • Điểm
      1
  • 1

    marketingcnsg

    Member
    • Bài viết
      75
    • Reaction score
      0
    • Điểm
      6
  • Top